Metalographic Equipment Accessories

CUTTING WHELLS  AND ABRASIVE CUTTING FLUID

CUTTING DISC

MATERIAL

DISC DIMENSIONS

SUITABLE TYPE OF MATERIAL

HARDNESS RANGE
A1
A2
A3
Brown corundum & silicon carbide
​ᴓ 250 X 2 X 32 mm
​ᴓ 300 X 2 X 32 mm
​Gray & nodular cast iron
​HB 130-180
​HB 180-300
​HB 30 ≥ 
B1
B2
B3
​White corundum & silicon carbide
​ᴓ 250 X 1,5 X 32 mm
​ᴓ 300 X 1,5 X 32 mm
​Hardened steel
​HRC 30-40
​HRC 40-60
​HRC 60 ≥
C1
C2
C3
​Silicon carbide
​ᴓ 250 X 1,5 X 32 mm
​ᴓ 300 X 1,5 X 32 mm
Non ferrous metarials as like brass,aluminum
​HB 50≤
​HB 50-100
​HB 100 ≥
D1
D2
D3
Single crystal corundum & chromium corundum
​ᴓ 250 X 1,5 X 32 mm
​ᴓ 300 X 1,5 X 32 mm
Special type hardened nodular iron,bearing steel,HSS,alloy tool steel,carbon tool steel
​HRC 30-40
​HRC 40-60
​HRC 60 ≥

A-​Gray & Nodular Cast Iron

A1:Gray & Nodular Cast Iron​,  for(HB 130-180) 
​Max:3500 rpm , 250*2*32 mm
​Max:3500 rpm , 300*2*32 mm
Material:Brown corundum & silicon carbide
A2:Gray & Nodular Cast Iron, for (HB 180-300)
​Max:3500 rpm , 250*2*32 mm
​​Max:3500 rpm , 300*2*32 mm
Material:Brown corundum & silicon carbide
A3:Gray & Nodular Cast Iron, for (HB 300 ≥ )
​Max:3500 rpm , 250*2*32 mm 
​Max:3500 rpm , 300*2*32 mm
Material:Brown corundum & silicon carbide

​B-​Hardened Steel

B1:For Hardened Steel, for (30-40HRC)  Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​White corundum & silicon carbide​
​B2: For Hardened Steel, for (40-60 HRC) 
 Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
Material:​White corundum & silicon carbide
B3:For Hardened Steel, for ​(HRC 60 ≥)
 Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
Material:​White corundum & silicon carbide

C-Non Ferrous Metarials as Like Brass,Aluminum

C1:Non ferrous metarials as like brass,aluminum, for (HB 50≤) 
​ Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​​Silicon carbide
C2:Non ferrous metarials as like brass,aluminum, for (HB 50-100)
​ Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​​Silicon carbide
C3:Non ferrous metarials as like brass,aluminum, for (HB 100 ≥)
​Max:3500 dev/dak , 250*1,8*32 mm
​ Max:3500 dev/dak , 300*1,5*32 mm
Material:Silicon carbide

D-Special Type Hardened Nodular Iron,Bearing Steel,HSS,Alloy Tool Steel,Carbon Tool Steel

D1:Special type hardened nodular iron,bearing steel,HSS,alloy tool steel,carbon tool steel, for
​(30-40 HRC) için,
​ Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​​Single crystal corundum & chromium corundum
​D2:Special type hardened nodular iron,bearing steel,HSS,alloy tool steel,carbon tool steel, for
​(40-60 HRC) için, 
​ Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​​Single crystal corundum & chromium corundum
D3:Special type hardened nodular iron,bearing steel,HSS,alloy tool steel,carbon tool steel, for
(HRC 60 ≥)
​ Max:3500rpm, 250*1,5*32 mm
 Max:3500rpm, 300*1,5*32 mm
​Material:​​Single crystal corundum & chromium corundum
Picture

        BULUCUT Abrasive cutting fluids are microfine emulsion type cutting fluid concentrates and recommended for all ferrous and non-ferrous metals.  Suitable for a wide range of materials and operations. Excellent emulsion stability. Can be used in water up to 25° dH. Clean and mild product. Will not smoke or burn. Very economical due to its low top-up concentration. Protect from freezing, direct sun and store between 5 - 30° C. 

POLISHING CLOTH 

NYLON
(Suitable with polishing compound of 7-20 microns)
CANVAS
(Suitable with polishing compound of 5-14 microns)
PANNE
(Suitable with polishing compound of 3-5 microns)
WORSTED
(Suitable with polishing compound of 3-5 microns)
VELOUR
(Suitable with polishing compound of 3-5 microns)
FLOCKING
(Suitable with polishing compound of 1-3 microns)
WOOLEN
(Suitable with polishing compound of 1-3 microns)
PASHM
(Suitable with polishing compound of 1-3 microns)
PURE SILK
(Suitable with polishing compound of  5-3 microns)
CASHMERE
(Suitable with polishing compound of 0,3-3 microns)